Menkobond 1200

Product Description

MENKOBOND 1200 membranes are Preformed HDPE fully bonded membrane comprised of a thick HDPE film, pressure sensitive adhesive and weather resistant protective coating.

These membranes bond with wet concrete cast on the membranes, to form an excellent sealing which effectively stops lateral water migration. Thus it prevents ingress of water into the structure and tracking of water between membrane and structure. Reinforcement can be directly laid on top of membrane.

Features & Advantages

  • Forms a unique continuous adhesive bond to concrete poured against it – prevent water migration and make it unaffected by any substrate settlement beneath the
  • Provides a barrier to water, moisture and gas – physically isolates the structure from the surrounding
  • Easy roll/kick out installation – reduces installation time and
  • Simple and quick to install – requiring no
  • Can be applied to permanent form work – allows maximum use of confined
  • Ready for immediate placing of
  • Unaffected by wet conditions – cannot activate prematurely. Inherently waterproof, non-reactive
  • Unaffected by freeze/thaw, wet/dry
  • Chemical resistant – effective in most types of soils and waters, protects structure from salt or sulphate
  • Excellent bonding with concrete applied on membrane, to protectconcrete effectively for the design life of the structure.
  • Low flatness requirement to substrate, reliable overlapping, fast and easyapplication without requiring use of
  • 75/100 mm overlaps ensure effective water-tight joints once overlaid with concrete over
  • Good puncture

 

Typical Application

  • Basements.
  • Subways, underground metro
  • Retaining walls for confined
  • Cut and cover tunnels.
  • Caverns
  • Other underground civil

 

TECHNICAL PARAMETERS
SL.NOPROPERTIESSTANDARD VALUESSTANDARD TEST METHOD
1ColorWhite/Off whiteVisual Observation
2Roll size20 meter length x 2.4 meter Width 
3Basic film Thickness0.7 mmASTM D 3767
4

Composite

membrane Thickness

1.2 mmASTM D 3767
5Tensile Strength (Average of MD & CD)>21 MPaASTM D 412 Modified
6

Elongation at break

(Average of MD & CD)

>400 %ASTM D 412 Modified
7Low Temperature Flexibility-250C PassASTM D 1970
8Puncture Resistance>800 NASTM E 154
9Crack cyclingPass

ASTM D 836/ASTM C 1305

Modified

10

Peel Adhesion to

concrete

880 N/mASTM D 903 Modified
11

Resistance to Hydrostatic

Head

60 metersASTM D 5385 Modified
12UV Exposure Limit21 Days Pass 
13Overlap Width75/100 mm 

Tolerance

Typically, +10 % from the above values. All parameters are obtained under controlled lab conditions.

Shelf life

The shelf life is typically 12 months if stored as per the recommendations in a covered and secured storage space.

Packaging

Roll size of 20 m length x 2.4 m width.

Back to Top
×